3-Lodo-4-Methoxybenzoic acid - Names and Identifiers
3-Lodo-4-Methoxybenzoic acid - Physico-chemical Properties
Molecular Formula | C8H7IO3
|
Molar Mass | 278.04 |
Density | 1.878±0.06 g/cm3(Predicted) |
Melting Point | 239-243 °C |
Boling Point | 359.9±32.0 °C(Predicted) |
Flash Point | 171.5°C |
Vapor Presure | 8.3E-06mmHg at 25°C |
pKa | 4.12±0.10(Predicted) |
Storage Condition | 2-8°C |
Sensitive | Light Sensitive |
Refractive Index | 1.631 |
MDL | MFCD00017347 |
3-Lodo-4-Methoxybenzoic acid - Risk and Safety
Hazard Symbols | Xi - Irritant
|
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 - Wear suitable protective clothing.
S37 - Wear suitable gloves.
|
WGK Germany | nwg |
HS Code | 29189900 |
Hazard Class | IRRITANT |
3-Lodo-4-Methoxybenzoic acid - Introduction
3-lodo-4-methoxybenzoic acid is an organic compound with the chemical formula C8H7IO3. The following is a description of its nature, use, formulation and safety information:
Nature:
-Appearance: 3-Iodo-4-methoxybenzic acid is a white crystalline solid.
-Melting point: about 180-182 degrees Celsius.
-Solubility: It has better solubility in some organic solvents (such as ethanol and dimethyl sulfoxide), but it has poor solubility in water.
Use:
3-lodo-4-methoxybenzoic acid is commonly used as an intermediate in organic synthesis and can be used to synthesize other organic compounds, such as drugs and pesticides.
Preparation Method:
3-Iodo-4-methoxy benzoic acid can be synthesized by the following steps:
1. 4-methoxybenzoic acid and iodine are reacted by sulfonic acid chloride to obtain 3-Iodo-4-methoxybenzoic acid sulfonate.
2. 3-Iodo-4-methoxybenzoic acid sulfonate is reacted with a base to generate 3-Iodo-4-methoxybenzoic acid.
3. Further purification and crystallization to obtain pure product.
Safety Information:
3-Iodo-4-methoxybenzoic acid has low toxicity, but the following safety precautions should be paid attention:
-Use with appropriate personal protective equipment, such as lab gloves and goggles.
-Avoid inhaling dust or contact with skin and eyes.
-If inhaled or exposed, rinse immediately with water and seek medical help.
-Stay away from ignition sources and combustible substances during operation.
Please note that the above information is for reference only. Please refer to the relevant chemical literature and laboratory guidelines for specific use, and follow the appropriate safety procedures.
Last Update:2024-04-09 15:17:59